中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
YY/T 0660-2008 外科植入物用聚醚醚酮(peek)聚合物的标准规范(中英文版) Standard Specification for Polyetheretherketone(PEEK) polymers for Surgical Implant Applications |
|||
GB/T 21707-2008 变频调速专用三相异步电动机绝缘规范(中英文版) Insulation specification for variable frequency adjustable speed definite purpose converter-fed three-phase induction motors |
|||
HG/T 3045-2008 排吸用螺旋线增强的热塑性塑料软管(中英文版) Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification |
|||
JJF 1206-2008 频率标准与数字时钟的远程校准校准规范(中英文版) Calibration Specification for the Remote Calibration for Frequency Standard and Digital Clock |
|||
GB/T 13397-2008 合金内氧化法银金属氧化物电触头技术条件(中英文版) Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method |
|||
GB/T 15972.10-2008 光纤试验方法规范 第10部分:测量方法和试验程序 总则(中英文版) Specifications for optical fibre test methods - Part 10: Measurement methods and test procedures - General and guidance |
|||
GB/T 9410-2008 移动通信天线通用技术规范(中英文版) General specification for antennas used in the mobile communications |
|||
GB/T 21646-2008 400MHz频段模拟公众无线对讲机技术规范和测量方法(中英文版) Technical specification and testing methods for analog public radio interphone on 400MHz band |
|||
GB/T 21671-2008 基于以太网技术的局域网系统验收测评规范(中英文版) Acceptance test specification for Local Area Network (LAN) systems based on ethernet technology |
|||
GB/T 4930-2008 微束分析 电子探针分析 标准样品技术条件导则(中英文版) Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs) |
|||
GB/T 15972.30-2008 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test |
|||
GB/T 15972.20-2008 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|||
GB/T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版) Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|||
GB/T 15972.50-2008 光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热(中英文版) Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) |
|||
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版) Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|||
GB/T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数(中英文版) Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|||
GB/T 15972.51-2008 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热(中英文版) Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat |
|||
GB/T 15972.49-2008 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延(中英文版) Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|||
GB/T 15972.47-2008 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|||
GB/T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版) Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
找到:2093條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [65] [66] [67] [68] [69] [70] [71] |